Friday, January 13, 2012

Cyclesport Travel information meeting

Cyclesport Travel/Cronometro

Cycling Vacation information night.


Have you ever thought about a cycling vacation in France, how about Italy? Thursday, January 19th is your chance to stop in and check out the great trips
Cyclesport Travel is offering for 2012.

The Pyrenees Playground Trip June 25th to July 7th
This trip include an opportunity to participate in the Ariegeiose Cyclosportive and ride virtually all the important Pyrenees climbs.
Castles, cave paintings, the Tourmalet, Plateau de Beille, Ancizan, Col dAspin, Col d Agnes, the Corniche and the Mamar are all
on the menu for this incredible experience.



This years L'Ariegeoise Cyclosportive will finish atop Plateau de Beille in the L'Ariegeoise 161km and
La Mountagnole 117km events.



Tour de France trip July 9th to July 17th
Experience the TDF like the French villages do! We will let the Tour come to us in the our mountain village and ride up the Port de Lers to watch the pros!
Ride every day and come back to your cabin or head down to the local bar to watch the Tour excitement.







You will have the chance to ride the 18 percent grade on the last climb of stage 14 before the tour attacks it.

Italy, Gran Fondo Prosecco and Chianti October 1st -10th
Ride through two beautiful wine producing regions and celebrate by rolling through the Prosecco vineyards during the Gran Fondo on Oct 7th.
 LINK TO GRAN FONDO PROSECCO


We will have wine and cheese snacks and lots of pictures of past trips.
Time: 6:00-8:00

We hope to see you then.
Colin, Dave, Mark and Scott

Cyclesport Travel is now able to take credit cards! Just our way of trying to make your trip more convenient.



Thursday, April 28, 2011

This is just to good.

To good not to post.
Published with Blogger-droid v1.6.8

Wednesday, January 5, 2011

Adventures In Compatibility

With Cervelo's new "BBright" bottom bracket standard comes new challenges in mating drivetrain parts. The BBright layout is similar to the popular BB30 standard in that the crank spindle is 30mm in diameter, but Cervelo has chosen a BB shell width of 79mm instead of the typical 68mm found on road bikes, even those using the BB30 standard.

Interestingly, the drive side of Cervelo's BBright bottom bracket shell is unchanged from a BB30 shell and the extra 11mm in shell width is added to the non-drive side of the frame.

Partering with Cervelo in the BBright project is Rotor, who makes an impressive crank specifically for BBright frames. Unfortunately, Rotor does not offer a BBright crankset with 180mm crankarms. We therefore chose to outfit Tom's new Cervelo R3 with a Shimano Dura Ace crankset, which is offered in 180mm.

The most obvious challenge in using the Shimano crank is to reduce the bottom bracket opening from 30mm to Shimano's 24mm Hollowtech II spindle diameter. This is fortunately achievable using BB30 adapters currently on the market. The problem, however, is that these adapters are made with a 68mm bottom bracket shell in mind and not the BBright 79mm shell.

Because the drive side of the bike follows the BB30 standard, the adapter works fine on the non-drive side. On the non-drive side, however, Colin had to fire up the lathe and turn this:



Into this:



Tom's crank is now spinning happily along. Stock Q-factor is preserved, and it has ample clearance on both sides.




The appropriate adapters should be commercially available at some point, but I could not find them at the time of this post.

Friday, November 5, 2010

Cyclocross Brake Chatter/Shudder

Lennard Zinn wrote a great article (HERE) about the common problem of chattering front cantilever brakes on cyclocross bikes. Basically, when the cable housing stops above the top of the steerer tube, as it does on most 'cross bikes, fork and frame flex caused by braking forces can create sharp spikes in cable tension. These spikes lead to increased braking force, to the point where one of the following must happen:

1. The front wheel locks up and skids
2. The rider is thrown over the handlebars
OR 3. The brake pad finally breaks free from the rim surface

The path of least resistance is option number three, and that's precisely what happens. After the pad breaks free however, the cycle begins all over again. This constant sticking and slipping is what causes the shudder that can be truly terrifying.



This Trek X02 had the worst chattering front brake I had ever seen when equipped with its stock cable hanger (above the head tube). Simply switching the hanger position completely eliminated the chatter. No change in brake pad material or toe-in angle was required.

A very stiff frame and fork should reduce the problem, but I have seen really nasty chattering on newer 'cross bikes with 1.5" oversized lower head tubes that are supposed to be ultra stiff. It seems that any frame and fork, oversized or not, will flex to some degree under hard front braking. If the cable hanger is placed above the head tube, this flex is going to translate into cable tension spikes to some degree. On some bikes, it is minor enough that there's not much of a problem, but a crown-mounted hanger could be the solution if your cyclocross bike shudders badly.

As Zinn states, many carbon fork crowns are not equipped with a bolt hole for mounting a hanger there. Luckily the XO2 above did have a hole. If you're stuck without a bolt hole in your fork crown, you could try Cane Creek's Drop-V lever and using linear pull front brakes instead of cantilevers. The Drop-V is a brake lever only and not a shifter, so you would only be able to run a single chainring on the front.

Thursday, October 28, 2010

Stolen!

Colin rode his Surly Traveler's Check to work yesterday and locked it up outside the back door. Someone managed to steal it in broad daylight despite the visibility and constant traffic of people in and out the door.



The thief must have been a really smart guy, as the genius put it up for sale on Craigslist today. We called him posing as a buyer, but sent Madison's Finest to the meeting instead. Now the bike is back and he's in jail!



Unfortunately he had already stripped it of its Nite Rider light, its fenders and seatpost with Regal saddle. It came back with a crappy suspension post and crummy saddle. All in all a great success though.

Tuesday, September 14, 2010

One of those days.



You know you're in for a long day when you've already had to slam a Cherry Coke and cut up the can for shims before noon. I was already jacked up on coffee too.

We got some nice words from pro triathlete Charisa Wernick recently. Her bike was a little bruised up from the airline's henchmen, so I realigned the rear derailleur hanger and replaced the cable. Good as new, and she took 5th place in Sunday's Ironman Wisconsin!

@crono_Madison thanks for fixing my bike!! Awesome bike shop if you need anything before #IMWI http://twitpic.com/2n5h5l

Friday, September 3, 2010

...and were back!

Ironman Wisconsin is right around the corner, which means life is hectic but also fun because we get visited by professional triathletes from all over the world who have made a habit of bringing their bikes to us for service before the event.




Today I got to get Hillary Biscay's machine ready to do battle. She has won the Wisconsin Ironman before, so be sure to watch for her out on the course. Don't blink because she'll be going by pretty fast.

Wednesday, May 19, 2010

Blog Revival

Keeping the blog up to date is tough when the shop is busy...

The Wheels on Willy criterium took place this past Sunday, with excellent weather and a return to the original course that goes right past our front door.

It was quiet in the wheel pit, without a single mishap while I was on duty. A very different experience from the one I had working for Shimano Multi-Service at the Collegiate Nationals Road Race recently. Rain all day made conditions ripe for punctures, and I changed roughly 40 wheels for competitors. A race day mechanical problem is never a good experience, but it's rewarding when they get back on the road and chase back into the peloton.

Friday, January 29, 2010

On Hiatus

I'll be on the road for the next five weeks with Joe Pug. You won't see any blog posts in that time, but you can follow what I'm up to on twitter:

www.twitter.com/madisonandrewh

Here's where we'll be:

www.joepugmusic.com/tour

Wednesday, January 27, 2010

Sticky Front Derailleur

I've mentioned sugar residue and its negative effects on shifting, and today I came across a particularly frozen front derailleur. The sugar had dripped all over the derailleur from a leaky water bottle, and fluid in our parts washer was powerless against the sticky residue. Because the sugar was originally suspended in fluid, it was able to flow deep into every one of the derailleur's moving parts. It occurred to me that the best way to get down into the nooks and crannies would be to soak it. However as I mentioned before, the parts washer fluid was having no effect on the sugar. Instead I used....water!

I don't normally recommend dunking your expensive bike parts in water, but it turned out to be a very effective due to sugar's solubility in water.

If you ever try this method, be sure to thoroughly dry and lubricate the part after you're done!


Sticky and lifeless front derailleur.


Into the dunk tank.


The derailleur is getting cleaner and the water is getting dirtier.


Here's a shot of the water soaking the derailleur for a few hours. Don't drink that.


A little scrubbing with a toothbrush cleaned it right up!

Thursday, January 14, 2010

Let's build some wheels.



We just got in various Edge rims for wheel build projects. The shallowest (25mm)and lightest tubular version weighs in at 213g. We'll add DT Swiss 190 hubs to make an unbeatable climbing wheelset.

The second set will incorporate two different depths of clincher rim: 65mm rear and 45mm front, with respective weights of 450g and 400g. Using DT Swiss 240 hubs keeps the cost down a bit and still yields competitively light wheels.

We plan to have various wheel configurations available for demo use during the coming season. They really have to be ridden to be believed, so we're happy to send you out on them for a real-world test ride.

Friday, January 8, 2010

Bike Swap TOMORROW

We'll be closed tomorrow, January 9th, for the 19th annual Cronometro Bike Swap. If you haven't been to the swap, it's worth checking out whether your looking for that hard-to-find N.O.S. European part, a winter beater frameset, or just some entertainment.

We'll be there giving some presentations and socializing.

You can find the details HERE.

Friday, December 11, 2009

Cronometro’s 2010 Annual Service Package

Cap the cost for all the service your bike will need for an entire year!
Pay $300 for the year and receive $430 worth of professional service.

Nice bikes should be overhauled each year and often need a drivetrain tune-up sometime during the season to keep them working at their best. Your bike rides will be more fun when the shifting, braking and handling have been optimized by a professional mechanic.

Included in the Annual Service Package:

-One Complete Bicycle Overhaul ($225 Value) (Must be completed by Feb 28th, 2010)
  • Bike is stripped down to bare frame and any necessary frame labor covered, including thread chasing, seat tube honing, bottom bracket and head tube facing, head tube reaming, and thorough cleaning.
  • All parts cleaned in solvent tank, lubricated and reinstalled.
  • Wheels trued, tensioned and dished.
  • Hubs, headset and bottom bracket disassembled and cleaned, any ball bearings replaced and packed with fresh grease.
  • All new cables and housing installed.
  • Handlebars wrapped with new tape on road bikes, or grips installed on
  • mountain bikes.

-One Complete Tune-Up ($150 Value)
  • Drivetrain parts (Chain, Cassette, Derailleurs & Crankset) removed from bike and cleaned in solvent tank. Parts are lubricated and reinstalled.
  • Wheels trued and tensioned.
  • Front and rear shifting systems adjusted.
  • Front and rear braking systems adjusted.
  • Headset, bottom bracket and hub bearings adjusted.
  • Torque checked/adjusted on fasteners.
  • New shift cables and housing
  • Handlebars wrapped with new tape on road bikes

-Free adjustments as needed throughout the calendar year
  • Front and rear braking adjustments
  • Front and rear shifting adjustments
  • Headset, bottom bracket and hub adjustments
  • Wheel truing
  • Chain/cassette replacement labor covered
  • Tire/tube replacement labor covered (clinchers only)
  • Brake pad replacement labor covered

A limited number of packages are available for the coming year. The 2010 Annual Service Package must be purchased by Jan 31st, 2010.
The 2010 Annual Service Package will expire on Dec 31st, 2010. All work must be completed prior to this date.


The Cronometro Service Department
Campagnolo Pro Shop, DT Swiss Certified Wheelbuilding
24 hour turnaround on repairs scheduled by appointment.
(Not including work requiring special order parts.)

Thursday, November 12, 2009

Packing bikes for travel or shipping is not the most glamorous part of this line of work, but it is fun when the bike is going to an event like the Ultraman World Championships in Hawaii. Think of Ultraman as a race that exists for those who don't find the Ironman challenging enough.

Here are the bios for this year's competitors, including Madison's own Ann Heaslett. Good luck Ann!

Tuesday, October 27, 2009

Sticky Shifting

On longer rides, calorie intake is a necessity. However, the sugars contained in many sports drinks pose a hazard to the function of your bikes shift cables. If your bottles leak the fluid, gravity will eventually pull it down to the lowest spot on the frame, which is the underside of the bottom bracket shell. This spot also happens to be where both shift cables run over the plastic cable guide which leads them to their respective derailleurs. The extra friction caused by dried sugar on the cable guide inevitably leads to poor shifting and possibly broken shift cables.

The underside of this bike has been coated by dirt and debris that only stuck to the frame because of the sugar residue. If you look closely you can even see the red tint of the energy drink. The easiest solution to this problem is to make sure you close the valve on your bottle after taking a drink, as this is the most common cause of leaks. Also make sure the bottle lids are fully tightened but not overtightened to the point of damaging them.
If you find that your bike does have a coating of sugar residue, Pedro's Green Fizz does an excellent job of removing it without damage to your bike or the planet.

Friday, October 23, 2009

Blogging About Blogging

The Tech Blog was featured in this article from InBusiness magazine as an example of how blogging can facilitate making connections with existing and potential customers. Pretty cool, despite their comment on my infrequent posting, which is fair considering that I do in fact post infrequently.

Wednesday, October 21, 2009

Tufo's Elite Pulse Tire


Just a quick note about the straightest and roundest tubular tire I've ever seen. It's Tufo's new Elite Pulse tire. It is also, however, a bit on the expensive side.

Friday, September 18, 2009

New Seven

Now that Ironman Wisconsin is over, I might have some time to contribute to the blog occasionally.
Today we received a new Seven Axiom with custom paint.

Here is a link to Seven's amazing finish options.

We're building the bike with Shimano's new Ultegra 6700 group, which has inherited much of the technology originally developed for Dura Ace 7900.

Friday, July 31, 2009


Here's a very cool custom wheel I've just finished for a Cervelo P4.
It's an Edge Composites 68mm rim with a PowerTap SL+ Wireless hub in black.



Thursday, June 4, 2009

Here's a pair of wheels I just finished for a friend of ours at Saris Cycling group, makers of the impressive PowerTap hub. He requested Marwi's "Ti-Dye" Titanium spokes, which sure do have some bling when laced to Velocity Fusion rims in gold!